دیسپرس کننده BYK-W 966

BYK-W 966 Wetting and dispersing additive for filled unsaturated polyester resins as well as acrylic, PU and epoxy resins to reduce viscosity and prevent settling.

امتیازی ثبت نشده

:BYK® -W 966

محلولی از نمکی از آمیدهای پلی آمین غیراشباع و پلی استرهای اسیدی است. به عنوان عوامل مرطوب کننده و پراکنده عمل می کند. خاصیت ضد ته نشینی دارد. پراکندگی طیف وسیعی از پرکننده‌های رایج مانند کربنات کلسیم و تری هیدروکسید آلومینیوم (ATH) را بهبود می‌بخشد. BYK® -W 966 ویسکوزیته سیستم را کاهش می دهد تا بار پرکننده بیشتر امکان پذیر باشد و در عین حال از ته نشین شدن پرکننده جلوگیری شود. پرکننده ها را با تثبیت فضایی جدا می کند. برای چسب های پلی استر و مناسب برای چسب های PUR، اپوکسی، اکریلیک توصیه می شود. سطح توصیه شده آن 0.5 - 1.5٪ بر اساس پرکننده است.

دانلود مشخصات فنی دیسپرس کننده BYK-W 966

مشخصات فنی

دیسپرس کننده BYK-W 966
  • عمومی
  • کشور سازنده
    • آلمان
  • وزن برحسب گرم
    • 500گرمی
  • نحوه ارسال
    • باربری
  • برگه اطلاعات فنی کالا TDS
    • BYK® -W 966
    • BYK®-W 966 by BYK is a wetting and dispersing agent for filled unsaturated polyester resins as well as for acrylic, PU and epoxy resins to reduce viscosity and prevent settling. It is used for fiber reinforced spray-up and hand lay-up resins and cobalt-accelerated putty compounds. It is an aromatic-free solution of ANTI-TERRA®-U 100. It contains 34% renewable raw material. It improves the dispersion of all conventional fillers such as calcium carbonate and aluminum hydroxide. It reduces the viscosity of the filled resin, allowing a higher filling level. In most cases, the settling of fillers during storage and processing is reduced. The recommended level is 0.5-1.5% additive (as supplied) based upon fillers. It is listed in EINECS, TSCA, DSL, AICS, PICCS, ENCS, NZIoC and ECSI. It is in line with Directive 2011/65/EU (EU RoHS 2), as amended by the Delegated Directive (EU) 2015/863 (EU RoHS 3), EU Directive 2002/96/EC (WEEE), EU Directive 94/62/EC (Packaging Waste) and CONEG Toxics in Packaging. It complies with REACH Regulation (EC) No 1907/2006. The shelf life of BYK®-W 966 is 36 months.
    • Product Type
    • • Other Additives for Liquid Systems > Wetting Agents
    • • Dispersing Agents
    • Chemical Composition
    • Solution of a salt of unsaturated polyamine amides and acidic polyesters
    • Physical Form
    • Liquid
    • Appearance
    • Light brown
    • Product Status
    • COMMERCIAL
    • Applications/ Recommended for
    • • Epoxy, Epoxide Resin
    • • UPR
    • • Conversion of composites & thermosets > Spray-up
    • • Conversion of composites & thermosets > Hand lay-up
    • • Polymer Conversion > Wettability
    • • Polymer Conversion > Dispersion
    • Labels/Agency Rating
    • Listed in EINECS, TSCA, DSL, AICS, PICCS, ENCS, NZIoC and ECSI
    • In line with Directive 2011/65/EU (EU RoHS 2), as amended by the Delegated Directive (EU) 2015/863 (EU RoHS 3), EU Directive 2002/96/EC (WEEE), EU Directive 94/62/EC (Packaging Waste), CONEG Toxics in Packaging
    • Complies with REACH Regulation (EC) No 1907/2006
    • ________________________________________
    • BYK® -W 966 Properties
    • Property
    • Amine Value 19 mg KOH/g
    • Acid Value 26 mg KOH/g
    • Density 7.22 lb/gal At 68°F
    • Non-volatile Content 52 % At 302°F. 10 min
    • Flash Point 100 °F
    • Melting Point < 0 °C
    • Boiling Point 153.00 °C Initial
    • Vapor Pressure 13.00 hPa At 20.00°C
    • Auto-ignition Temperature > 200 °C DIN 51794
    • Viscosity, Kinematic 199.000 mm2/s At 20.00°C
    • Viscosity, Kinematic 54 mm2/s At 40.00°C
    • Solubility Properties
    • Immiscible in Water

نقد و بررسی

نظر شما

loader