ضدرسوب و ضد شره مخصوص رنگهای پایه حلال اتومبیلی و صنعتی

EFKA RM 1463 rheology modifier for solvent based systems

امتیازی ثبت نشده

ضدرسوب و ضد شره Efka® RM 1463 یک اصلاح کننده رئولوژیکی بر پایه آمید واکس ها بوده و برای پوشش ها و چسب های پایه حلال زیر مناسب می باشد:

ضدرسوب و ضد شره رنگ و چسب های پلی اورتان

ضدرسوب و ضد شره رنگ و چسب های اپوکسی

ضدرسوب و ضد شره رنگ و چسب های پایه آکریلات

ضدرسوب و ضد شره رنگ و چسب های پایه آلکید

ضدرسوب و ضد شره رنگ و چسب های پایه پلی استر

ضدرسوب و ضد شره رنگ و چسب های پایه سیلیکون ها

ضدرسوب و ضد شره رنگ و چسب های پایه کلرینیتد رابرها

ضدرسوب و ضد شره رنگ های کوره ای و پخت شونده با اسید

ضدرسوب و ضد شره رنگ و چسب های وینیلی

Efka 1463 بدون ایجاد کدری در شفاف پوشه های (کلیر کوت ها) اتومبیلی و چوب می تواند استفاده شود. Efka 1463 یک ضد شره و ضد رسوب بسیار قوی نسبت به سایر ضد رسوب و ضد شره های تجاری مشابه در بازار است. Efka 1463اثرات نامطلوب بر روی براقیت و همترازی پوشش ها ایجاد نمی کند.همچنین Efka 1463 برای پوشش های متالیک که با پیگمنت های خمیر آلومینیوم ساخته می شوند بسیار مناسب است و باعث ایجاد یکنواختی و درخشش در ذرات خمیر آلومینیوم داخل پوشش شده و نقاط تیره-روشن را در خمیر آلومینیوم (لیفینگ و نان لیفینگ ) که در حالت عادی وجود دارد می تواند حذف کند:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Efka 1463 در درصد های یکسان نسبت به سایر غلظت دهنده های پایه حلال مشابه (اما با ساختار شیمیایی متفاوت) عملکرد قوی تری دارد .

 

 

 

دانلود دیتا شیت ضدرسوب و ضد شره Efka® RM 1463

مشخصات فنی

ضدرسوب و ضد شره مخصوص رنگهای پایه حلال اتومبیلی و صنعتی
  • عمومی
  • کشور سازنده
    • آلمان
  • وزن برحسب گرم
    • گالن ..... کیلویی
  • نحوه ارسال
    • باربری
  • برگه اطلاعات فنی کالا TDS
    • Efka® RM 1463
    • rheology modifier for solvent based systems
    • • pre-activated polyamide wax thickener
    • • enhanced anti-sagging and anti-settling properties
    • • applicable in most solvent based synthetic resin systems for industrial, architectural, heavy duty and marine coatings.
    • chemical nature: polyamide wax
    • physical form: yellowish white paste
    • storage: Efka® RM 1463 should be stored in room temperature preferably above 10°C (50°F).
    • solid content  20%
    • density  0.88 g/cm3
    • solvents : xylene, ethanol
    • incorporation temperature: 10°C – 60°C (50°F – 140°F)
    • Application
    • Efka® RM 1463 is a rheology modifier for solvent based systems. It can be used in a broad range of formulations with most commonly used resins, such as medium and short oil alkyds as well as acid curing alkyd systems, chlorinated rubbers, vinyls and unsaturated polyesters. It is specially recommended in heavy duty anti-corrosive systems based on polyurethanes and epoxies where strong anti-sagging properties are required. Efka® RM 1463 creates a sharp needle network structure with hydrogen/
    • oxygen bonding. This results in a good anti-settling effect in pigment preparations and a good anti-sagging and anti-settling effect in the final paint. Care should be taken in baking systems like alkyds melamine to avoid a loss of inter-coat adhesion.
    • recommended concentrations : For anti-settling: 0.5 – 2.0%
    • For anti-sagging: 2.0 – 5.0%
    • We recommend to determine the optimum dosage level of Efka® RM 1463 by laboratory trials to achieve the desired performance.Efka RM 1463 is a pre-activated polyamide wax. No heat is required for
    • activation. Efka® RM 1463 should be added to the final stage of the paint formulation. It is recommended to disperse the additive under moderate shear conditions. Care should be taken for over-grinding and over-heating as this will break down the sharp needle network structure.

نقد و بررسی

نظر شما

loader