فروش دی کیومیل پراکسید آلمانی

Dicumyl peroxide

امتیازی ثبت نشده



دی کیومیل پراکسید به طور اختصار DCPنامیده می شود. یک جامد پودری سفید به صورت دانه شکری می باشد. فرمول شیمیایی دی کیومیل پراکسید C18H22O2 بوده و از خانواده آلکیل پراکسید ها می باشد.کاربرد دی کیومیل پراکسید به عنوان آغازگر و عامل پخت در فرآیندهای کو پلیمریمریزاسیون استایرین، کراسلینک کردن الاستومرها و کمک تاخیر انداز شعله در ساخت فوم های EPS  است.  همچنین از دی کیومیل پراکسید DCP در کاهش شاخص جریان مذاب MFI  پلی الفین ها استفاده می گردد. 
دی کیومیل پراکسید آلمانی موجود در فروشگاه آنلاین آمازون تله یکی از بهترین کیفیت های DCP موجود در دنیا بوده که خلوص بالای 99% داشته و ساخت کمپانی معروف آکزونوبل است.

 

دانلود دیتا شیت Perkadox BC-FF

مشخصات فنی

فروش دی کیومیل پراکسید آلمانی
  • عمومی
  • کشور سازنده
    • آلمان
  • وزن برحسب گرم
    • 200gr
  • نحوه ارسال
    • ارسال رایگان با پست پیشتاز درب منزل یا محل کار
  • برگه اطلاعات فنی کالا TDS
    • Perkadox® BC-FF
    • Dicumyl peroxide. Used for the crosslinking of natural and synthetic rubbers, as well as thermoplastic polyolefins. Offers good processing safety with a moderate rate of cure. Being thermally unstable substance, it may undergo self accelerating decomposition. Used in wire and cable applications.
    • Dicumyl peroxide is recommended for the crosslinking of NBR, SBR, EP(D)M, LDPE and EVA. Rubber compounds containing Dicumyl peroxide combine good processing safety with a fair speed of cure.
    • Safe processing temperature (t2): 130°C
    • Typical crosslinking temperature (t90): 170°C
    • The safe processing temperature t2 is defined as the temperature, at which the scorch time is longer than 20 minutes. The typical crosslinking temperature t90 is defined as the temperature at which 90% of the crosslinks in the compound are formed within about 12 minutes.
    • Polymerization of styrene:
    • Dicumyl peroxide may be used for the polymerization and copolymerization of styrene. In a mass process Dicumyl peroxide can be used to increase polymerization rates.
    • Temperature range: 110 to 165°C
    • Dosing: 0,02 to 0,1 phr
    • Coagent in flame retardant polystyrene:
    • Polystyrene is made flame retardant by the use of halogen-containing additives such as hexabromocyclododecane . Dicumyl peroxide may be used as a synergistic coagent in combination with hexabromocyclododecane to produce flame retardant expandable polystyrene.
    • Product Type
    • Crosslinkers / Curing Agents / Hardeners > Organic Peroxides
    • Chemical Composition
    • Dicumyl peroxide
    • CAS Number
    • 80-43-3
    • Masterbatch
    • No
    • Physical Form
    • Crystals
    • Product Status
    • COMMERCIAL
    • Applications/ Recommended for
    • • ABS
    • • Other Thermoplastic > EVA
    • • PA, Nylon
    • • PBT
    • • PC
    • • PE
    • • Other Thermoplastic > Other Polyester
    • • PP
    • • PS (Polystyrene)
    • • Other Rubber > EPDM
    • • Natural Rubber
    • • Other Rubber > QM, VQM, Silicone Rubber
    • • SBR
    • • Other Thermoplastic > PSU (Polysufone)
    • • Other Thermoplastic > PEEK, PEKK,PEK…
    • • PS (Polystyrene) > HIPS
    • • Other Thermoplastic > PPE
    • • Other Thermoplastic > PPS
    • • Wiring & Cables
    • • Vulcanization
    • Bio Based
    • No
    • ________________________________________
    • Perkadox® BC-FF Properties
    • Molecular weight 270.4
    • Active oxygen content 5.92 %
    • Assay > 99 %
    • Density 1.11 g/cm3
    • Melting point 39.5 °C
    • Bulk density 660 kg/m3
    • Tapped bulk density 705 kg/m3

نقد و بررسی

نظر شما

loader