غلظت دهنده قوی مایع برای سیستم های پایه حلال EFKA RM 1400

Efka RM 1400

امتیازی ثبت نشده
دانلود دیتا شیت Efka RM 1400

مشخصات فنی

غلظت دهنده قوی مایع برای سیستم های پایه حلال EFKA RM 1400
  • عمومی
  • کشور سازنده
    • آلمان
  • وزن برحسب گرم
    • 500gr
  • نحوه ارسال
    • ارسال رایگان با پست پیشتاز درب منزل یا محل کار
  • برگه اطلاعات فنی کالا TDS
    • Efka® RM 1400
    • (old: Rilanit® R4 )
    • Use
    • RILANIT® R 4 is a liquid additive which, when stirred into solvent-type air-drying paint systems, will produce a stable thixotropic viscosity increase. This offers a number of advantages such as:
    • - sag control
    • -bodying
    • - flow control
    • - reduction of pigment settling,flooding and floating.
    • Composition : RILANIT® R 4 is an anionic vegetable oil derivative.
    • Specification
    • Appearance viscous brownish liquid (8000)
    • pH value (10%) 7.5 - 8.5 (8228, UNE-EN 1262)
    • Active substance 78 - 82% (8625)
    • Brookfield viscosity 1.000 - 3.000 mPa•s (RVT, sp-3, 20 rpm, 20 ºC,8032, EN 1791)
    • Application
    • RILANIT® R 4 is used exclusively in pigment coatings based on binders air-drying by oxidation,such as alkyd resins and drying oils. RILANIT® R 4 gives good performance in systems not having an extremely low viscosity and with a pigment volume concentration of above 25 - 30%. It cannot be used in paints containing metallic pigments. Although the presence of active pigments, calcium or zinc soaps, to activate the performance of RILANIT® R 4, is not required, the addition of such products may increase the effect of the additive.
    • Dosage
    • As already mentioned above RILANIT® R 4 may be added during any stage of production of pigmented coatings; however, the following methods are suggested:
    • Post-additive to the finished paint:
    • If a subsequent correction of the flow properties is desired,RILANIT® R 4 may be incorporated into thepaint by stirring. A stable viscosity increase will result after a few hours.
    • Grinding aid:
    • RILANIT® R 4 may be added to the mill base if, besides the advantages resulting
    • from thixotropy, better pigment dispersion is desired. This method is also recommended if,because of strong pigment settling, good suspension properties as well as «bodying» are required.
    • If this method is used, pigment floating and flooding may also be reduced. When grinding RILANIT® R 4 together with the pigments, full thixotropy will develop within approximately 12 hours.
    • Given the same pigmentation, the performance of RILANIT® R 4 is about proportional to the amount added. The quantity required is usually between 0.25 - 1.0%, calculated on finished paint.
    • Besides paint type and composition, the level of pigmentation is the most decisive factor in selecting the correct dosage of RILANIT® R 4. With rising pigment-volume concentrations, equal amounts of RILANIT® R 4 will cause an increase in thickening.
    • Considering the large number of possible varations of paint formulations, RILANIT R 4 should first be tested under laboratory conditions.
    • If RILANIT® R 4 is intended for use in coatings with high performance requirements regarding drying, yellowing and anti-corrosive properties, its suitability should be confirmed by laboratory evaluations, particularly if it is necessary to use a large amount of this additive.
    • Regulatory Status
    • TSCA, EINECS, DSL/NDSL, PICCS, AICS, ECL, ENCS/MITI, ECS
    • Avoid to store the product at temperatures below 0ºC.

نقد و بررسی

نظر شما

loader