بهبود دهنده چسبندگی بر پایه آمینو سیلان

AT394

امتیازی ثبت نشده
دانلود دیتا شیتAdherant 1121

مشخصات فنی

بهبود دهنده چسبندگی بر پایه آمینو سیلان
  • عمومی
  • کشور سازنده
    • امریکا
  • وزن برحسب گرم
    • 1000gr
  • نحوه ارسال
    • ارسال رایگان با پست پیشتاز درب منزل یا محل کار
  • برگه اطلاعات فنی کالا TDS
    • Adherant 1121 is an adhesion promoter for solvent-based air-dry paints in glass and metal substrates. Adherant 1121 reacts to isocyanate and phenolic aldehyde amine systems curing agent. Please check the curing agent type before use, to avoid products gel
    • PHYSICAL PROPERTIES
    • Composition amino silane
    • Appearance colorless to yellow-clear liquid
    • Active content ca. 50 %
    • Solvent n-butanol
    • Specific gravity 0.89 - 0.92
    • Refractive index 1.419 - 1.422 (25℃)
    • APPLICATIONS
    • Epoxy coatings
    • Silicone resin based coatings
    • Alkyd coatings
    • KEY PROPERTIES
    • To improves adhesion of air-dry alkyd paint to glass and metal substrates.
    • To improves adhesion of epoxy coating film when subjected to high humidity conditions or water
    • immersion.
    • To enhances salt spray resistance.
    • INCORPORATION
    • • Adherant 1121 used in epoxy system, it should be blended with curing agents. Please check the
    • •curing agent dosage and test compatibility before use.
    • •Adherant 1121 reacts to isocyanate and phenolic aldehyde amine systems curing agent. Please
    • •check the curing agent type before use, to avoid products gel.
    • •Before application, removed oil or liquid water of substrate or else reduce adhesion
    • LEVELS OF USE
    • 1 - 2 % based on total resin solids, add during let-down stage.
    • HANDLING AND SAFETY
    • Adherant 1121 contains amino, after storage for a long time, the appearance will become
    • brownish and no side-effect on the performance.
    • As it contains solvents, the product requires special care in handling.
    • Avoid any eye and skin contact.
    • For further information please check to MSDS.
    • STORAGE RECOMMENDATIONS
    • Keep away from sources of ignition and heat.
    • Keep container tightly closed in a dry and
    • well-ventilated place.
    • Stored between 0℃ to 40℃.

نقد و بررسی

نظر شما

loader