افزودنی امولسیونی پلی سیلوکسان اصلاح شده با رزین سیلیکونی واکر آلمان

SILRES® BS 1310 is a solventfree, water-thinnable emulsion of a polysiloxane modified with functional silicone resin.

امتیازی ثبت نشده

شرکت واکر آلمان در جهان پیشرو در زمینه تولید ترکیبات و مواد سیلیکونی می باشد . افزودنی SILRES BS 1310 یک امولسیون پایه آبی پلی سیلوکسانی اصلاح شده با عاملیت رزین سیلیکونی است. SILRES BS 1310 جهت آب گریز کردن و مقاومت به آب پوشش های ساختمانی پایه آب بسیار کارا و موثر است. افزودنی SILRES BS 1310 در رنگهای امولسیونی پایه آب و افزودنی های گچ و صنایع شیمی ساختمان می تواند مورد استفاده قرار گیرد. محصولات ساخته شده با SILRES BS 1310 از خواص درزگیری عالی، زیبایی ، آب گریزی و عایق بندی خوبی برخوردار هستند. SILRES BS 1310 در ترکیب با رنگهای امولسیونی پایه آب و یا به تنهایی می تواند به جذب آب کم سطح ، تنفس پذیری بخار آب بالا پوشش، کاهش جرم و چرک پذیری، مقاومت دربرابر خراش و ضد لک بودن کمک کند.

دانلود دیتا شیت SILRES BS 1310

مشخصات فنی

افزودنی امولسیونی پلی سیلوکسان اصلاح شده با رزین سیلیکونی واکر آلمان
  • عمومی
  • کشور سازنده
    • آلمان
  • وزن برحسب گرم
    • گالن 25 کیلویی
    • فروش SILRES BS 1310
  • نحوه ارسال
    • با باربری به تمام نقاط کشور
  • برگه اطلاعات فنی کالا TDS
    • Product description :
    • SILRES® BS 1310 is a solventfree, water-thinnable emulsion of a polysiloxane modified with functional silicone resin.
    • Application
    • SILRES® BS 1310 is an additive used in the manufacture of aqueous masonry coatings and aqueous primers to enhance water repellency and water resistance. It also improves the processability and antiblocking characteristics of the aqueous coatings.
    • Typical application fields are whitewash emulsions, silicate emulsion paints and plasters, highly filled emulsion coatings and silicone resin emulsion paints and plasters.
    • Processing
    • SILRES® BS 1310 may be added undiluted to aqueous masonry coatings and primers either during or after manufacture. We recommend adding 1 - 3 wt% to masonry coatings.
    • Storage
    • The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
    • Product data
    • Typical general characteristics
    • Appearance milky, white
    • Solids content approx. 50 %
    • Density at 20 °C DIN 51757 approx. 1 g/cm³
    • pH-Value approx. 7

نقد و بررسی

نظر شما

loader