آکریل آمید
Acrylamide
- برند:Union Chem Tw
- دسته بندی:مواد اولیه رزین
acrylamide
آکریل امید یک ترکیب آلی به شکل جامد پودری سفید رنگ و بی بو با فرمول مولکولی CH2=CHC(O)NH2 می باشد.اکریل امید در بسیاری از حلال های الی و آب محلول است. از آکریل آمید به طور عمده برای ساخت پلی آکریل آمید صنعتی استفاده می شود، که پلی اکریل آمید به عنوان عامل غلظت دهنده آب پایه و عامل لخته ساز در تصفیه آب و پساب کاربرد دارد.آکریل آمید به شدت سرطان زا بوده و برای انسان مضر می باشد. مصارف عمده آکریل آمید عبارتند از: صنایع نساجی، صنایع کاغذ،تصفیه آب، استفاده در پلیمریزاسیون و کوپلیمریزاسیون جهت تهیه رزین ها ، صنایع نفت، پزشکی،متالوژی و کشاورزی و ... ژل آکریل آمید برای الکترونورز که یک تکنیک جداسازی پروتئین است استفاده می شود. براي اولين بار وجود مقادير نسبتاً زياد آكريلاميد در غذاهاي غني از كربوهيدرات مانند سيبزميني و محصولات غلات كه در درجه حرارتهاي بسيار بالا (بالاتر از 120 درجه سانتي گراد) پخته يا سرخ ميشوند، مشاهده شد. اين يافته از اهميت زيادي برخوردار بود، بويژه اين كه غلظت آكريلاميد در غذاها به طور قابل توجهي بيشتر از ساير مواد سرطانزاي شناخته شده موجود در غذاها مانند هيدروكربنهاي آروماتيك پليسيكليك و اتيل كربامات است .
مشخصات فنی
آکریل آمید- عمومی
-
کشور سازنده
- تایوان
-
وزن برحسب گرم
- 300gr
- فروش اکریل امید
- فروشAcrylamide
- فروش اکریل آمید میکروبیولوژی در فروشگاه مواد شیمیایی آمازون تله
-
نحوه ارسال
- ارسال رایگان با پست پیشتاز درب منزل یا محل کار
-
برگه اطلاعات فنی کالا TDS
- ACRYLAMIDE
- MOLECULAR BIOLOGY REAGENT
- STRUCTURE: CH2=CH-CO-NH2
- Monomer content, % 98.9
- CAS NUMBER: 79-06-1
- SYNONYM: 2-propenamide
- Product Description
- Appearance: White powder
- Molecular formula: C3H5NO
- Molecular weight: 71.08
- Melting point: 84.5 °C,
- although stable in the dark, it
- readily polymerizes at its melting point, in solution or
- under ultraviolet light.1
- Special tests: DNase, RNase and Protease were not
- detected per procedures on lot-specific data sheet.
- Acrylamide as a monomer is used in a variety of
- synthetic processes to form polymers, copolymers. It is
- readily polymerized in the presence of free radicals,
- usually in aqueous solutions. Polyacrylamide plastics
- have numerous commercial applications, due in part to
- the tendency of polyacrylamide to adsorb many times
- its own mass in water.
- In biochemistry, its principle use is in the preparation of
- polyacrylamide gels, using suitable cross-linkage
- agents, for use in electrophoresis separation
- techniques. Common reaction initiators are riboflavin,
- ammonium persulfate; varying the ratio of acrylamide to
- crosslinking agent permits the formation of a gel with
- predictable average pore size and texture. A number of
- excellent laboratory manuals give specific protocols for
- preparing "PAGE" (Polyacrylamide Gel Electrophoresis)
- gels; see page 2 for a partial reference list. Acrylamide
- has a tendency to hydrolyze under acidic or basic
- conditions to form acrylic acid.
- Acrylic acid and any ionic impurities in the acrylamide
- can have significant effects on the performance of the
- PAGE gel formed, since the voltage across the gel is
- affected by the ionic charge of the gel and usage
- buffers. Sigma tests each lot of A9099 for its suitability
- for use in electrophoresis of nucleic acids (more detail
- is available on lot-specific information sheets sent with
- the product.) Several other products are also available
- A 3553, Electrophoresis Reagent, which has a higher
- purity specification and additional testing for trace
- impurities, solution conductivity and acrylic acid
- content; and A 4058, which is a ready-to-use 40%
- solution prepared from A 3553; A8887 is also of high
- purity, but has not received as extensive testing for
- application suitability.
- NOTE:
- Acrylamide as a monomer is considered toxic, directly
- affecting the nervous system, and it may reasonably be
- considered to be a carcinogen.4
- Acrylamide is readily
- absorbed through intact skin from aqueous solutions.1
- Please consult the Material Safety Data Sheet and
- appropriate safety procedures before handling this
- material. Once polymerized, the solid POLYacrylamide
- is considered quite safe, although PAGE gels should
- still be handled with gloves under the assumption that
- they may still contain unreacted monomer.
- Storage/Stability
- If acrylamide is kept protected from light, it is expected
- to be stable indefinitely at room temperature. After three
- weeks storage at 50 °C, there is no evidence of
- polymer formation and only slight yellowing occurs.
- Even after 24 hours at 80 °C (slightly below melting),
- pure samples show little or no polymer formation.3
- It
- should be evaluated for continued suitability every three
- years.
- Acrylamide is routinely tested at 250 mg/mL in water,
- giving a clear colorless solution. It is soluble at least to
- 40% (w/v) in water2
- , and reportedly up to 215 g/100 mL
- in water at 30 °C.1
- It is soluble in methanol
- (155 g/100 mL), ethanol (86 g/100 mL), acetone
- (63.1 g/100 mL); only minimally soluble in benzene or
- heptane.1
- Solutions should be stable at 2-8 °C for at least a year if
- stored protected from light.
تماس بگیرید
تماس بگیرید
تماس بگیرید
تماس بگیرید
تماس بگیرید
تماس بگیرید