ضد کف و ضد حباب مخصوص لاک های شفاف

AT313

امتیازی ثبت نشده
قیمت :

265,000

تومان

280,000

تومان

مشخصات فنی

ضد کف و ضد حباب مخصوص لاک های شفاف
  • عمومی
  • کشور سازنده
    • آلمان
  • وزن برحسب گرم
    • 500gr
    • فروش ضد کف و ضد حباب مخصوص لاک های شفاف
  • نحوه ارسال
    • ارسال رایگان با پست پیشتاز درب منزل یا محل کار
  • برگه اطلاعات فنی کالا TDS
    • AGITAN® DF 311 M
    • TECHNICAL INFORMATION
    • Defoamer for solvent based systems
    • Composition: Blend of silicone oil and non ionic surfactants in a light mineral oil, APEO free
    • Appearance: liquid
    • Colour: yellowish
    • Typical Properties: Active ingredients: 100%
    • Viscosity: < 7 mPa s
    • Density at 20°C: approx. 0.81 g/cm³
    • Flash point: above 70 °C
    • Solubility in water: insoluble
    • pH (2% in dist. water): approx. 7
    • This information is intended as a guideline only and should not be used to issue specifications. Slight
    • deviations do not affect application and capability of the product. For specifications please consult the
    • Certificate of Analysis.
    • Properties/applications: AGITAN DF 311M is a defoamer for all common solvent based systems. It provides
    • the following properties:
    • - Controls foaming and aeration during paint manufacture, filling and application
    • - Low viscosity for easy dispersibility
    • - Good compatibility in a wide range of solvent-borne systems
    • - Long lasting efficiency
    • Main applications:
    • - Clear wood varnishes
    • - Two-pack epoxies
    • - Unsaturated polyesters
    • Recommended levels/use: AGITAN DF 311 M should be used as received. A split addition is recommended
    • adding 1/3 to 2/3 during pigment dispersion, the remainder during let down.
    • Suggested dosage for some typical applications:
    • Clear wood varnishes 0.05-0.2 %
    • Two-pack epoxies 0.1-0.3 %
    • Unsaturated polyesters 0.1-0.3 %
    • Storage/handling: AGITAN DF 311 M is not sensitive to freezing. However it should be stored between
    • 5 and 35 °C for better handling. The defoamer tends to get cloudy and to separate when stored below 0°C. It can be homogenized by heating to 25°C while mixing. As the product generally tends to separate it must be mixed before use.

نقد و بررسی

نظر شما

loader